Chicago - Montrose Harbor, IL 60613
$36,500
Chicago - Montrose Harbor, IL 60613
$36,500
Westerbeke
20hp
1400
Cutter
36ft
1976
36-C
-
Westerbeke
20hp
1400
Cutter
36ft
1976
36-C
-
Buccaneer is a cutter rig (three sails) in a unique design by noted naval architect Bruce King. This was Ericson's bi-centennial boat, one of only around 65 built, the best the company could produce and designed to be something special. This is the rare example of a classic boat in excellent condition, maintained by a loving owner.
While the boat itself is fiberglass, there is so much woodwork it appears to be beautifully made of wood. Exterior woodwork is teak; the cabin is all hand laid mahogany. The deck is flat, big enough to accommodate many passengers. The cockpit, with added bimini top and newer seat cushions, compares favorably in comfort and space to a much larger yacht.
In addition to its beauty, this boat is constructed like a tank and weighs almost 10 tons. It was designed for long distance ocean travel in all weather conditions. Buccaneer has had only 3 owners. For 16 years It has been lovingly maintained by the current owner, who has now reached the age when old sailors transition to trawlers.
Nominal Length:36ft
Length Overall:38ft
Max Bridge Clearance:50ft
Beam:11.98ft
Fresh Water Tanks:1 × 100gal
Fuel Tanks:1 × 50gal
Holding Tanks:1 × 35gal
Engine Make:Westerbeke
Engine Model:null
Total Power:20hp
Engine Hours:1400
Engine Type:inboard
Fuel Type:diesel
2 bilge pumps
Auto-pilot
Hot water heater
VHF radio
110V outlets throughout
Portable air conditioner and several electric heaters
Heart Inverter/charger with Link 2000
Added engine instruments - RPM, oil, temp
4 batteries - 3 deep cell and 1 starting - which are charged by the inverter on shore power or by the engine's generator when on the water
Westerbeke 20hp diesel engine - approx 1400 hrs
30 Amp shore power
New weather station
New halyards
New mast lights and all new mast wiring
Three sails - new main sail, 160% roller furling genoa, stay sail
Shrouds and stays are oversize stainless steel wire running to aluminum knees for maximum strength
2 hatches over fore and aft cabins and one saltbox hatch over the salon
2 Dorade ventilators over galley and head
Bimini top
Thru-hull fittings are bronze, each with a gate valve
Newer custom seat cushions for all cockpit seating
Non-skid rubber coating for cabin top
5000 pound lead keel molded integrally into the hull
Hull and deck layup by hand, of scheduled laminations of woven roving and fiberglass cloth for maximum strength and durability.
New safety lines
New electric horn
6 winches, 2 oversized with changeable gears
Danforth anchor
GPS chart plotter
Auto-pilot
Is the boat information inaccurate or suspicious? Report It
Knowledge and awareness are the best defense to prevent fraud. Please read our fraud awareness tips to protect yourself and others!