1990 Irwin 54 Ketch

Description

Irwin 54' Sailboat Limited Design

This Yacht is NEW to the market. Here’s your first look / MORE details coming SOON!!

Don't wait she ready to view.

Irwin is known for being easy to sail short-handed with more space above and below deck than you will find on most other yachts of the same size. Charter companies throughout the Caribbean have been using Irwin yachts for 30 years for their simplicity, and spaciousness and easy to maintain fiberglass decks.

Her shallow draft 5.6 foot allows her to go where few 54 Foot Yachts can GO.

WINDSONG has been continuously UPDATED & RENEWED featuring all, New Gamin Full Electronics, New Washer & Dryer, Internal Mainsheet, Custom Stainless-Steel Ports, New Lewmar Hatches, Custom Lights, New Northern Lights Generator, Dinghy with Outboard, New Custom Hard Top with Custom Cockpit Enclosure, Custom, Stern Seats, Cable Winder Box, Double Capstan Anchor Windlass, Autopilot, Radar, GPS/Plotter.

Highlights.

Large Master Cabin / queen size

Well Appointed Guest Cabin / queen size

Guest Cabin 2 or Crew Quarters / 2-Bunk Beds

Irwin 54’ Ketch - 1990 / Upgrades, modifications, and additions.

•Yanmar 4LH-TE  110hp - Complete overhaul, rebuild and installation (5/2016). Completely itemized invoice available for review as to the extensive work performed. 

•New 200-amp Balmar alternator installed (5/2016).

•New exhaust turbo installed (5/2016).

•Overhaul and re-ratio with new gear set, KM5A transmission, installed (5/2016).

•New Northern Lights M773LW3G: 9kw genset with sound shield installed (2/2015).

•Main mast removed and rewired ‘100%’ (10/2015).

•New mast step fabricated, powered coated and installed (10/2015).

•Mast re-stepped (12/2015).

•New Garmin electronics installed (9/2017). Garmin 7612 GPS chart plotter and (4) remote Garmin nav pods.

•Refrigerator door and freezer hatch reconstructed with 4” foam insulation laminated and glassed in place with epoxy and fiberglass construction.

•New custom-built lightweight hardtop painted w/Awl Grip and an anodized aluminum super structure, welded mounted and installed (10/2015).

•Custom vinyl and Sunbrella canvas enclosure fabricated and installed (2016).  (3) forward window panels constructed using 1/6” Makrolon w/UV film.

•New Starboard composite dive platform fabricated and installed (9/2015).

•New sail track for main and mizzen mast replaced (4/2017).

•Brightwork refinished (5/2022).  Old finish on teak taken down to bare wood.  (2) coats low viscosity epoxy applied. Sanded between coat, followed up with (4) coats Captain’s varnish, sanded between coats.

•New Rocna ‘Vulcan’ 40kg fixed anchor and 200’ high 5/16” high test chain installed (5/2017).