1992 SISU Center Console

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Features include:

Yamaha 150 outboard with 150 hours

Hull repainted with Awlgrip (desert sand color)

Self-bailing cockpit with large scuppers (6 inches by 2 ¼ inches) that drain overboard. No puddling

Birdsall Marine Design leaning post, with footrest and storage

Edson tri-spoke stainless PowerWheel with power knob.

Installed new Maine-built console sprayed with Alwgrip and trimmed in mahogany

Added 3/4-inch mahogany coaming around the boat which raises the effective freeboard by about 2-inches, perfect for digging a knee into when conditions get sloppy. Fresh varnish in 2024.

Taco Marine rubrail

Custom forward box for anchor, lifejackets, and other stowage.

Flotation

There are not federal regulations requiring flotation in boats 20 feet and greater. I wanted a boat that would stay afloat under the worst-case scenario. To increase safety, Koller added hand-cut closed-cell foam the forward and aft bilges.

The boatwright estimated we used seven 10-by-20-by-96-inch foam billets, each with a buoyancy force of about 610 pounds.