2000 Bertram 510 Convertible

The Bertram 510 Convertible has a modified deep-V hull that ensures the most comfortable ride in all sea conditions. Redesigned rudders and struts reduce hydrodynamic drag and increase performance, while redesigned propellers reduce vibration and noise. Engineers from the Ferretti Group, parent company of Bertram Yacht, added their knowledge of the latest construction and lamination techniques honed through years on the international offshore race circuit. The interior of the 510 Convertible has a spacious salon, while the functional galley on the main level leads to three comfortable cabins below. With sophisticated computer-aided design programs, Bertram engineers planned every aspect of the mechanical and interior layout to ensure optimum trim under all conditions for a consistently superior performance. For the sportfisherman, the Bertram 510 Convertible provides a fishing platform that meets and exceeds the demands of the most avid tournament angler.

• Leather L-shaped sofa
• Storage under sofa
• Cocktail table
• Overhead rod storage
• Main breaker panel
• Marine Air A/C controls
• Technics am/fm/cassette/cd player
• Samsung 40" TV

• Sub-zero refrigerator/freezer
• Kenyon cooktop
• Microwave oven
• Leather U-shaped dinette w/table
• Storage under dinette seat
• 240/120 appliance distribution panel

• Twin berths
• 13" TV/VCR combo
• AM/FM/cd player
• Nightstand
• Cedar lined hanging locker
• Marine Air controls
• Overhead and under bed storage
• Carpeting
• En suite head w/stall shower

• Twin Berths
• AM/FM/cd player
• Nightstand
• Cedar lined hanging locker
• Marine Air controls
• Hull side storage shelves
• Under-bed storage
• Carpeting
• Access to shared head via companionway door

• V-berth
• Marine Air controls
• AM/FM/cd player
• Carpeting
• Anchor locker access
• Bomar hatch w/ sunshade
• Hull side storage lockers
• Two cedar-lined hanging lockers
• Direct access to shared head from cabin

• Cockpit shade fixed (2019)
• (4) Rod holders
• Murray Bros. rocket launcher
• RUPP center rigger and outriggers
• 50 g. Live well
• Freshwater washdown
• Fish box (removable) w/ macerator pump
• Transom fish box w/ overboard drain
• Prep center w/ cutting board, fresh & saltwater sink & tackle drawers
• Transom door and gate
• Engine room entrance w/ storage door
• Port & starboard storage lockers
• Watertight stereo speakers
• Glendinning cable master
• Flybridge ladder w/ Plexi-steps

Flybridge:

• ACR spotlight with remote
• Simrad AP24 autopilot
• 2 Furuno open array Radars 12 kW/25 kW (new 2019)
• Furuno FCV292 color bottom machine
• Furuno NavNet 3D
• 3 Furuno monitors
• 2000 kW transducer
• 2 Standard Horizon VHF Matrix 6x2000 with command mics (2019)
• Fusion MS RA70NSX stereo (2019)
• JL Audio speaker (2019)
• JL Audio amp (2019)

Tower:

• NavNet 3D multiple
• ICOM VHF M34 (2019)

• Twin Caterpillar C-18 diesel (1050 hp) with approximately 50 hours after a complete overhaul in 2018 (over $180K invested)
• (2) Kilopak 15kw generators - port 5,464 hrs and stbd 8,122 hrs
• Oberdorpher quick-connect oil change pump
• New exhaust risers (2019)
• (2) Galley Maid fresh water pumps
• Hot water heater (2019)
• (2) Sentry battery chargers
• Fiberglass fuel tank w/ baffles
• 600 gpd water maker FCI
• Saltwater washdown pump
• (2) Brand new chilled water A/C system (2019)
• All new hoses and clamps throughout (2019)
• Racor fuel filters for engines & generators
• Stainless steel Aquamet 17 shafts (new shaft seals 2019)
• Cutlass and rudder bearings (new 2019)
• Bronze rudders & struts
• Lenco trim tabs
• Soda blast (2019)
• 2 Epoxy coats
• Windows were removed, resealed and put back in
• Bonding system
• Fixed Fire Boy fire suppression system for engines & machinery rooms w/ automatic & remote controls
• 12V and 24V DC
• 120V and 240V AC