Offered By: Small Boat Company
Engine
Yamaha F6SMHA
Total Power
6hp
Engine Hours
50
Class
Rigid Inflatable Boats (RIB)
Length
10ft
Year
2019
Model
Navigo 9 VS
Capacity
-
Boat Details
Description
Great opportunity to save money and time resourcing how to mount the boat to your swim platform. I have the solution with the 9.6ft Ab Navigo VS that has the pre-installed Weaver Leaver motor mount that keeps the motor horizontal while pulling the boat onto the swim platform. There is the weaver snap-in kit that is needed to complete this for an extra $500. The install would be needed and can help with installing for roughly $1300 total with glue work. It's about $1800 for the clip kit and installation. Selling the boat for 7500. In perfect condition comes with tiller extender, bench seat, Weaver leaver, Weaver stand off, Moeler bow mounted fuel tank, white cover. This boat is hard to get in white right now as well. White hypalon with gray handle loops. Never stored in the water, it has two stand off D rings mounted already. Must see saves on purchased new about $3800 or more.
Measurements
Speed & Distance
Cruising Speed:8.69kn
Max Speed:13.03kn
Range:4.34nm
Dimensions
Nominal Length:9.5ft
Length Overall:9.5ft
Beam:5.58ft
Weights
Dry Weight:143Lb
Tanks
Fuel Tanks:1 × 3gal
Fuel Tank Material:plastic
Propulsion
Engine Make:Yamaha
Engine Model:F6SMHA
Engine Year:2020
Total Power:6hp
Engine Hours:50
Engine Type:outboard
Fuel Type:gasoline
Propeller Type:3-blade
Propeller Material:aluminum
More Details
Standard Equipment
- Hand Laid Fiberglass Deep “V” Hull
- Stringer System Laminated into Hull
- Bow Locker/Seat
- Diamond Shape Non-Skid Deck
- Plastic External Transom Plate
- Aluminum Internal Transom Plate with Security Lip
- Orca (CSM) Five Layer Coated Fabric
- 3 Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
- Raised Double Rub Rail
- Stainless Steel Bow Eye
- 4 Stainless Steel Davit Lifting Points
- Stainless Steel Tow Rings & Tie Downs
- Deck Condensation Plug
- Deck Drain with Plug
- 1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
- 2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
- 2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
- 3 Layers Reinforced Seams
- Oarlock Base
- Telescopic Oars with Aluminum Shaft
- Paddle Holders
- Removable Rowing Seat
- Hand Pump
- Maintenance Kit
- Owner's Manual
- Additional Air Retaining Chamber Under the Floor
Key Features
- "V" Hull
- Double Solid Rubrail
- Aluminum Removable Rowing Seat
- More Payload capacity
- Diamond Shape Non-skid deck
- ORCA (CSM) Coated Fabric
- Sunbrella Fabric Dinghy Chap Available
- Sunbrella Fabric Boat Cover Available
- Internal Aluminum Plate with Security Lip
- Bow Locker
- Transom Towing & Tie Down SS Rings
- Reinforced (CSM) Fabric Handles
- Custom Colors Upon Request
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Location
Estimated Monthly Payment
$0.00*/month
Total Loan Amount: