Offered By: UnReel Marine
Engine
MERCURY 150XL
Total Power
-
Engine Hours
122
Class
Saltwater Fishing
Length
18ft
Year
2019
Model
184 CC
Capacity
-
Boat Details
Description
2019 Mako 184 CC powered by an American made Mercury 150 Four Stroke with ONLY 122 Hours! This boat with max rated HP is well equipped with a bimini top, GARMIN 74cv ECHOMAP Fishfinder/Chartplotter and stainless steel prop!
Unreel boats come with a completed 100 hour service, complete systems check and brand new battery to ensure you are ready for the water!
TRAILER INCLUDED!! IT'S UNREEL!!
The compact yet deadly MAKO® 184 CC is built tough for fishing and fun, whether you're chasing offshore game or just cruising the islands with the family. Anglers will appreciate the under-gunnel rod storage and the 21-gal. baitwell. And families will love the cushioned forward console seat and the molded-in swim platforms. The hull/deck joint is chemically sealed and bonded 360°, plus it's mechanically fastened every 6" with stainless steel fasteners. The chop-taming, aggressive Deep V hull allows it to brave rougher conditions with confidence, and the wide beam contributes to safety and stability at rest.
- Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
- Foam-injected hull w/1-piece fiberglass stringer grid
- Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
- Self-bailing cockpit w/non-skid deck surface
- Under-gunnel port & starboard rod racks
- Center console w/analog gauges, electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
- 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
- 2 pedestal helm seats & forward console seat w/21-gal. (80 L) baitwell
- Port & starboard bow seats w/64-qt. (61 L) insulated fishboxes w/drains below
- Custom-matched, tandem-axle aluminum trailer w/brakes
Measurements
Dimensions
Nominal Length:18.33ft
Length Overall:18.33ft
Beam:8.17ft
Weights
Dry Weight:2,255Lb
Miscellaneous
Deadrise At Transom:18deg
Tanks
Fuel Tanks:53.5gal
Propulsion
Engine Make:MERCURY
Engine Model:150XL
Engine Year:2019
Engine Hours:122
Engine Type:outboard
Fuel Type:gasoline
Propeller Type:3-blade
Propeller Material:stainless-steel
Features
Electronics
Depthsounder:✓
GPS:✓
Inside Equipment
Electric Bilge Pump:✓
Additional Equipment
Road Trailer:✓
More Details
Additional Specs
- Length:18' 4"
- Beam: 8' 2"
- Bottom width: 6' 8"
- Max. recommended HP: 150 HP
- Fuel capacity: 53.5 gal.
- Max. person capacity: 5 persons
- Max. person weight: 965 lbs.
- Max. person, motor & gear weight: 1727 lbs.
- Interior depth: 23"
- Transom height at center line: 25"
- Deadrise: 18 degrees
- Draft: 12"
- Dry weight: 2255 lbs.
- Average hull weight: 1800 lbs.
- Average package weight: 3055 lbs.
- Package height: 8' 6"
- Package height w/T-top or hardtop: 9' 10"
- Storage length: 25' 7"
Standard Features
Certification & Safety
- Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
- NMMA® certified
- Factory leak tested for hull, plumbing & fitting integrity
- Stainless steel hardware & fasteners for corrosion resistance
- CorrosionX stainless spray treatment included
- Horn
Console
- Binnacle-mounted motor control
- Gauge panel w/analog gauges
- Heavy-duty electrical switching system w/battery selector switch(es)
- Easy access to helm electronics, instruments & switches
- Forward-console seat w/21-gal. (80 L) baitwell
- Integrated full-width footrest
- Acrylic windscreen
- Marine-grade tinned wiring w/submersible connectors
- 2 console drink holders
Construction & Exterior
- 100% composite construction
- Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
- 1-piece molded fiberglass stringer grid w/integrated transom knee supports
- Closed-cell foam-injected stringer grid for USCG-approved flotation
- Premium marine-grade stainless steel hardware
- Heavy-duty rub rail & insert
- Closed-molded hatch covers w/finished undersides & integrated gaskets
- Aluminum backing plates for cleats, chocks & hinges
- Reboarding step & stainless steel grab handle
- MAKO® Bone White gelcoat
Electrical, Mechanical & Plumbing Systems
- USCG-compliant navigation lights
- Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
Interior
- Anchor locker
- Foredeck dodger mounting boss
- Port & starboard bow seats w/64-qt. (61 L) fishboxes w/gravity overboard drainage
- Low profile stainless steel bow rails
- 2 pedestal helm seats w/slide & swivel
- Self-bailing cockpit
- 2 gunnel-mounted rod holders
- Port & starboard under-gunnel rod racks for 4 rods
- Molded non-skid surfaces throughout
- Bilge access hatch
- Port & starboard molded-in swim platforms
- Four 6" (15.24 cm) polished marine-grade stainless steel cleats
Performance
- Legendary dry-riding MAKO® hull
- Aggressive deep V hull design
- Performance lifting strakes
- Factory-matched propeller
T-Top or Hardtop
- .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting
Trailer
- Tandem-axle EZ Loader® aluminum trailer
- NMMA® certified trailer
- DOT approved
- Tandem-axle brakes
- 13" (33.0 cm) radial tires w/galvanized V5 wheels & galvanized axle
- Oil bath hubs
- Leaf spring suspension
- Heavy-duty winch w/nylon strap & safety strap
- Stainless steel hardware
- Galvanized steel components
- LED lighting
- PVC loading guides
- Composite fenders
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Location
Estimated Monthly Payment
$0.00*/month
Total Loan Amount: