2023 Beneteau Oceanis 46.1

CONSTRUCTION

• Design in accordance with European Directive requirements and according to CE certification

• Monolithic polyester contact hull

• Monolithic contact structural counter mould (Fabrics - resin) bonded to the hull

• Injected deck construction in glass fiber and Saerform foam sandwich, covered with non-slip diamond pattern

• Cast iron keel fixed with bolts and stainless steel backing plates

• Twin rudders hung with stainless steel stock

• White coloured hull - Grey metal hull graphics

• 8 Hull portholes DECK EQUIPMENT

RIGGING

• Anodized furling mast (Z-Diffusion) deck stepped with in-mast furling system, 2 Aft swept spreaders

• Anodised aluminum boom

• Cathedral type single-strand stainless steel standing rigging

• Split backstay

• Rigid boom vang with tackle

• Self-tacking jib with on-deck furler

• 2 Stand Up mainsheet blocks on the coachroof

• 1 Self-tacking jib track with traveller

• All lines brought back to the helm stations (except boom topping lift and genoa halyard)

• Complete running rigging: Mainsail halyard, Genoa halyard with cleat on mast, Boom topping lift with cleat on mast, Mainsheet,

• 1 Self-tacking jib sheet

• 6 Clutches

• Halyard covers

• 2 Flag halyards

WINCHES

• 1 Self tailing winch (H40.2 STA) at each helm station

• 1 Aluminum Speed Grip winch handle

• 2 Winch handle holders SAILS (Elvström)

• Furling mainsail Dacron, with UV protection Natural, horizontal cut,

• Self-tacking jib Dacron with UV protection Natural, horizontal cut

MOORING LINES - MOORING

• Self-draining chain locker - Clench bolt - Hatch cover

• Single roller stainless steel bow fitting with offset roller

• 12 V - 1 000 W vertical electrical windlass - Remote control

• 6 Aluminum mooring cleats, Length: 400mm / 15 3/4’’ - Stainless steel chafing plate

SAIL LOCKER

• Access by polyester cover, Passage width: 65 x 50 cm / 2’2’’ x 1’8’’

• Stainless steel ladder

• Shelving unit

SAFETY ON DECK

• 1 Open stainless steel pulpit

• 2 Stainless steel pushpits

• 2 Stainless steel handrails on coachroof

• 1 Lifebuoy support bracket

• Welded ring on pushpit for flag

• Double guard lines and stainless steel stanchions, 650mm / 2’ 2’’

• Emergency ladder on pushpit

COCKPIT

• Self-draining cockpit

•1 Watertight compartment under cockpit benches & 1 Wet locker

• 1 Locker in cockpit bottom

• 1 Gas compartment under port helmsman seat

• Natural solid wood slatted on cockpit benches

• Natural solid wood slatted helm seats with starboard storage locker

• Foldaway helmsman foot chock

• 2 Steering wheel consoles:

• Stainless steel steering wheels (900mm diameter / 2’11’’)
• Anthracite leather covering
• Steering gear at the helm station
• Steering line transmission system
• Stainless steel handrail

• 2 Deck access for emergency tiller

• 1 Emergency tiller

• 1 Steering compass on the cockpit table

• Engine throttle and control panel on starboard

• Cockpit table, stainless steel frame, 2 natural solid wood extension leaves, 4 cup holders, stainles steel handrail, waterproof USB socket, life raft stowage

• 1 Cockpit shower with mixer tap

• 1 PMMA companionway door in 2 removable parts - Sliding hatch made of PMMA

SWIM PLATFORM / AFT TRANSOM

• Fully opening transom, convertible to bathing platform (2,65m x 0,80m / 8’8’’ x 2’7’’)

• Intermediate cockpit access step

• Manual control opening

• Natural solid wood slatted on swim deck

• 1 Stainless steel, removable bathing ladder with dedicated stowage in the cockpit

In-Stock