2023 Catana OC 50

• Inclined hulls and fine entry bows to benefit heading and speed
• Mast set farther aft with large foretriangle for balance under sail and ease of handling
• Good bridge-deck clearance for optimal comfort at sea
• Fine dagger-boards to reduce drag with electric raising and lowering
• Expanded loft-style living space that includes a large living room, spacious L-shaped kitchen, dedicated office and lounge area with a large sleeping berth

Integral structure manufacturing process

The hull/deck/main bulkhead joints are ensured by carbon fiber structural bonding and filleting. The entire hull/deck unit is a one-piece, non-deformable structure with exceptional stiffness and durability.

Sport structure and finish

- Hulls and deck in PVC/glass and carbon cloth sandwich infused by Vinylester resin
with anti-osmotic qualities.
- Coachroof, chainplate reinforcements and omega hull and deck reinforcements in
carbon cloth impregnated with Vinylester resin.
- Main structural bulkheads (PVC/carbon cloth sandwich) infused with Vinylester resin with monolithic UD carbon fabric angle.
- Bilges painted in light gray.
- Hull finish in gray gel coat
- Matt finish under nacelle
- Finish under nacelle leading edge and aft beam in gloss.
- White gel coat deck with integrated non-slip
- Composite dagger-boards sliding on PTFE bearings without wells
- Hull-deck joint by gluing with lamination at the stress zones (leading edge, chain plates, beam and compression beam cleats)

Mast / Rigging

- Anodized aluminum mast
- LED masthead anchor light
- Exits for mainsail halyard, solent halyard, Code 0 or Gennaker halyard and topping lift
- Combined LED steaming light/decklight
- Luff track on ball bearing slides
- Padeye for attaching lazyjacks
- Masthead wind instrument
- Anodized aluminum boom with spacers and lazy bag
- Anodised aluminum front beam with LED navigation light
- Carbon compression beam
- Solid carbon bowsprit
- Rod rigging stainless steel forestay
- Furler on forestay- 2 stainless steel 1 x 19 capshrouds
- 2 lower shrouds

-Deck hardware for spinnakers

Sails

Reinforced sails:
- 92 m2 fully battened, triradial cut, square-topped, mainsail in PRORADIAL, with 3 reefs, 6-row stitching
- Genoa in PRORADIAL, triradial cut, 6-row stitching, UV strip in same color as the lazybag

-Genaker CODETEC 95 + drum furler and rigging

Running rigging

- All running rigging returned to the helm station
- Mainsail halyard with Dyneema core
- Double mainsheet
- Solent halyard at the foot of the mast
- Code 0/Gennaker halyard led back to the steering station
- Solent sheet led back to the steering station
- Solent furling line
- 3 Reefing lines (N°1, N°2, N°3)
- 3 Reefing points (N°1, N°2, N°3)
- Boom topping lift
- 2 Flag halyards
- Adjustable foot tension

Deck hardware

Centralized fittings near the helm station

- 4 Harken Performa winches at the helm

- 2 Harken Performa winches aft of the helm for Genaker/Spinnaker

-1 Harken electric winch for tender lifting

- 3 winch cranks + cases: one case removed to accommodate EPIRB, but case still on board

-Rigging for Symm and Assym spinnakers

Mainsail:

- Double purchase, 4-line sheeting

- 2 Padeyes for mainsheet

Solent:

- 1 Sheet track forward of the mast

- 1 Track single slider for halyard tensioning

- 1 Furling line led back to the helm station with clutch

- 1 Sheet clutch

Sail maneuvers led back to the helm station:

- 3 Reefing tack clutches

- 3 Reefing line clutches

- 1 Clutch for mainsail foot tension

- 1 Main halyard clutch

- 1 Topping lift clutch

- 1 Solent clutch

Mainsail cover:

- Battened lazy bag in grey fabric and adjustable Ø 8 mm lazy jacks in Dyneema

Anchoring

- Lofrans 1700W/12V windlass with vertical axis

-Ultra anchor and swivel + 100 m stainless chain
- Corded remote control connected in the anchor locker
- Windlass handle for manual operation
- Pivoting bow roller in stainless steel for main anchor

-Freshwater pump with outlet in anchor locker

Deck equipment

- 2 Smoked plexiglass panels for access to the bow lockers
- 2 Polyester panels for engine hold access with diamond point anti-slip
- 2 Polyester panels for access to leading edge lockers with non-slip diamond edge
- 1 Roof hatch over galley in smoked plexiglass with blind and mosquito net
- Gas struts for all deck hatches
- 2 White lacquered aluminum davits with Spinlock clutches on each davit
- 2 Tender hoisting tackles with stainless steel snap shackles on dedicated winch
- 2 dagger-boards sliding on PTFE bearings and electrically operated from the helm station

-Teak lathing for transom and rear steps

-Teak lathing for cockpit and engine hatches and deck steps

-Electric davits 

Safety:

- Lifeline attachment points around the coachroof
- Handrails on coachroof in solid teak wood
- Handrails on the edge of the rear skirts
- High-comfort trampoline with braided mesh, lashed mesh by mesh.
- 2 Forward pulpits with white Polywood seat
- Aft railing in stainless steel tube
- 8 Stanchions
- Double Dyneema retroreflective guardwires
- 2 Gates for gangway
- 6 Large size aluminum mooring cleats
- 2 Aluminum mooring cleats inboard side of sugarscoops

Coachroof top:

- 3 LED exterior ceiling lights on dimmer
- Sternlight LED

Exterior equipment

- Access to the deck via GRP steps anti-slip diamond type
- 1 Bench seat lounger in the aft beam large storage locker with RTM polyester on gaz struts
- 1 Built-in bathing ladder port transom with handrail on the top of the skirt
- 1 handheld shower (hot/cold water)

-1 aluminum passerelle
- 1 passerelle socket in starboard sugarscoop
- 1 Emergency tiller access plug on each sugarscoop
- 4 Skirt step lights - courtesy LED
- Name and home port
- Batyline and pvc butt pocket under the winches at the control station

Foredeck (Mast foot area)

- Large anchor locker with access by locker lid on ram
- Space for life raft with automatic “CATANA” release system and swivel hatch under nacelle.

Helm stations / Rudders

-4 PERFORMA electric winches in lieu of manual winches 

Helm seat with footrest + solid teak duckboard
- Helm console integrated into the roof as a backrest for the maneuvering station
- Magnetic steering compass with protective housing and lighting
- Gray fiberglass steering wheels Ǿ 1000 mm
- 2 Suspended balanced rudder blades, mounted on JP3 spherical self-aligning bearings
- 1 Emergency tiller
- Mechanical transmission steering system with Dyneema lines and ultra low friction ball bearings
- Manual engine controls at the helm station with engine instruments and alarms

Sail Locker

- LED lighting
- Removable ladders fixed on the inside of the hulls.

General

- Fronts of the furniture: PVC foam sandwich, laminated decor

- Laminated PVC foam sandwich floors in the hulls and PVC cladding on the nacelle

- PVC ceiling and liner linings

Comfortable cockpit completely open to the outside

- Saloon accessible by 4-leaf sliding door sliding to starboard with clear glazing.

- Panoramic view through 3 large forward windows and wide lateral plexiglass windows

- Ventilation through 2 large opening front bay windows and 2 side bay windows for total opening

- L-shaped seat with storage

- Folding saloon table with integrated bar for 8 people

- Dimmable recessed LED spotlights

- Courtesy lighting in the ceiling

- 2 AC outlets (220/50hz)

- Cockpit upholstery: HR 30 foam + single stitching + spradling fabrics + aeration of the covers by eyelets

-Sun protections for windows of the roof in BATYLINE

-CONFORT interior upholstery

-1 set of outdoor cushions

-1 Bimini for helm station

-Full Bimini enclosure in clear panels

Raised saloon for panoramic view

- Deep L-shaped seat that can act as a watchkeeper’s berth

- Coffee table

- Under-seat storage & direct access for the electrical systems : Battery converter,

switch..

- 1 reading light + dedicated switch

- Saloon upholstery: HR 30 foam + single stitching + spradling fabrics - Marlin: 4 colors to choose from + aeration of the covers by eyelets

-Blinds in salon

-Blinds in hulls

Galley:

- Galley with large resin countertop

- 1 stainless steel sink 11⁄2 bowl

- 1 Two-way tap supplying potabilized water by microfiltration (carbon filter) on one side and fresh water from tanks on the other.

- 1 selective waste bin

- Pressurized hot and cold water

- 4 AC outlets (220/50hz)

- Ocean Chef 3 burner induction hobb

- 1 stainless steel electric oven with grill

- Combined Fridge 267L (9.4 cu ft) + Freezer 98L (3.5 cu ft)

- Space provided for a 9-cover dishwasher + extra fridge + cellar (options)

- Dimmable LED spotlights

- Plenty of storage space:

o Pot and pan drawers under the oven

o Sliding grocery cupboard to the right of the oven

o 2 high cabinets above the cooker

o Large corner storage box with access from the cockpit sofa

o Cabinet with door under the sink

o Large cupboard with 3 shelves and 2 large drawers for cutlery + cutlery tray

o Large drawer to the left of the fridge/freezer combination

Chart table:

- Large chart table with instrument console

- Console for electrical switch panel

- Chart table seat on swivel

- 1 chart table reading light

- Technical access under chart table

- 1 AC outlet (220/50hz or 115/60hz)

- 1 USB outlet

Owner’s hull (Port side)

- Access via wide companionway steps with the same floor covering as the hull.

- Hull closure by lockable sliding door

Aft cabin owner's version:

- Semi-Island bed (1,60m. x 1,90m.) with padded headboard

- One-piece bed base + hydraulic cylinders with direct access to the heater or air-conditioning

- 1 bedside tables

- 1 Large shelf with storage space on the inboard side

- 1 Drawer and multiple storage under-bunk

- 1 wardrobe + 2 cupboard with shelves

- 1 Large chest of drawers with shelves with dressing table

- 1 storage unit in the wall unit with flap

- Mirror on sliding doors

- Ventilation by hull portholes + 1 porthole in aft bay window

- Large fixed window in outboard topsides

- General lighting by LED spotlights in the ceiling with dimmer and 2 bedside reading

lights.

- 1 AC outlet (220/50hz or 115/60hz)

- 1 double USB port socket

- dimmable courtesy lighting under the bed

Owner's bathroom (3-cabin version):

- Private access from the cabin

- Built-in resin washbasin

- 1 Vanity unit high with mirror and lighting

- 3 base furniture with door

- 1 drawer under the basin

-Shower:

o Separate with glass panel and lock

o Shower column with high head and hand shower

o Storage for toiletries

o Ventilation window with blackout blind

o White plywood duckboard and bench

- Bathroom accessories (1 coat hook)

- Lighting by large fixed window

- Ventilation through hull portholes

- LED ceiling spotlight on dimmer switch

- Storage under basin

- Space for optional washing machine

- Large storage unit above the washing machine option

- 1 AC outlet (220/50hz or 115/60hz) under the sink

- Bench seat between the shower and the vanity unit

Separate owner's heads compartment (3-cabin version):

- Fresh-water electric W.C.

- Ceiling LED spotlight

- Porthole with blackout blind

- 1 toilet brush and toilet paper holder

Guest hull (Starboard)

Aft guest cabin:

- Access by door from the passageway

- Semi-Island bed (1,60m. x 1,90m.) with padded headboard

- One-piece bed base + hydraulic cylinders with direct access to the heater or airconditioning

- 1 Large shelf with storage space on the inboard side

- Storage cupboards and 1 hanging locker

- Ventilation by 2 hull portholes (in plexiglass window) + 1 porthole in fixed aft window

- General lighting by LED spotlights on dimmer and 2 bedside reading lights

- 1 AC outlet (220/50hz or 115/60hz)

- 1 x double USB outlet

- dimmable courtesy lighting under the bed

Heads compartment 1-shower/1-WC version:

- 1 Fresh water electric W.C.

- Toilet accessories (brush and toilet paper holder)

- 1 Large separate shower with satin plexiglass screen and ventilation via 1 hull porthole

- Bathroom accessories (1 coat hook, toiletries storage)

- LED Spotlights

- Unit with built-in basin and storage

- Wall cabinet with mirror and lighting

- 1 AC outlet in wall cabinet

             Forward guest cabin:

- Access by door from the passageway

- 2 bunk beds (0,80m. x 1,90m.) + (0,75m. x 1,80m.)

o Foldable upper bunk

o Extendable lower bunk with optional duckboard

- Storage space under the low berth

- Large shelf on inboard topsides

- Storage cupboards and hanging locker

- Big Storage box with upholstery for seats

- Ventilation by hull window (on plexiglass)

- General lighting by LED spotlights on dimmer and 2 bedside reading lights

- 1 AC outlet (220/50hz or 115/60hz)

- 1 x USB outlet

- Low-level courtesy lighting

• 12V and 220V electrical systems onboard
• 12V service battery bank, 400AH Lithium (LiFePo4)
• Generator 17.50 KVA, 50 hz with insulation and remote control
• Solar panels on the rear of the roof on the port side and the central area on the starboard side
• Victron charger/inverter 12V/3000W/120A/220V-50W

• Air conditioning Frigomar in hulls (3 cabins): 21 K BTU
• Spectra Catalina 340 C 12V watermaker with Zion protection system
• 1 fan/cabin + extra in salon
• 1 electric oven and hobs
• 1 microwave oven
• 1 washer dryer 6 kg/220V in port owner bathroom
• 1 extra 2 drawer freezer 

Helm Station

• Chart plotter RAYMARINE Axiom+ 12" multifunction couch screen WIFI/GPS
• Front mounting kit AXION 12 sun cover
• Charts: Navionics + large Mediterranean & Black Sea
• Instrument multifunction display I70S
• Autopilot controller sailing type P70s
• Loud speaker for Cortex 70 watts

Chart Table

• Screen Axiom+ 12" Multifunction 12" Tactile WIFI/GPS
• Monitor 24" Dell
• Adaptor HDMI F DVI 24+1 (for owner laptop)
• Convertor 'Victron' Phoenix 12V 275W 230 VAC VE direct Schuko
• Adaptor video wireless with Miracast / WIDI NOIR
• Instrument Multifunction Display I70S
• Autopilot controller sailing type P70s
• Cortex black box VHF AIS WIFI NMEA2000 with wired handset
• Iridium Go Motorola: no subscription
• Wall fixing kit for Iridium GO IRIACIRWBKT1301
• Adaptor connector outside antenna WAAC1301 Iridium Go

Main Autopilot

• EV1 Evolution Sensor 
• Power box ACU-400 E70100 + rudder angle sensor
• GPS active antenna RS150 with STNG/NMEA2000 
• Linear hydraulic group 50ST20 NEWAVE 12V + Clips kit

Antennas/Sensors/Networks

• Radar antenna chirp quantum Q24D doppler with cable 15M
• Mast support for radar quantum 2KM SC20 Raymarine
• Wind vane sensor ST 60 with cable 30 M 
• Sensors instruments convertor iTC-5
• VHF antenna 25M Luxe code 1141
• ACTIV sensor DST810 LOCK/SOUNDER/T NMEA 2000 
• Network hub HS5 Seatalk HS Raynet
• Fixed Iridium Antenna
• Sets of cable, connectors and accessories

TV and other:

• TV and bulkhead setup
• TV antenna
• Chain counter at helm station

Engine compartments

• 2 x 80 HP YANMAR upgraded diesel engines, soundproofed and totally separated from the interior. Very light use on the engines: 350 hours. Engines serviced July 2024. 
• Engine panels and controls via mechanical cables at the helm station
• 2 saildrive transmission systems
• 2 folding three-blade MAX PROP propellers
• 1 Diesel filter / water separator per engine
• Booster for alternators 12V/100A
• Watermaker: Spectra Catalina 340 C 12V watermaker with Zion protection system
• Engine compartment illuminated by two LED striplights
• Gray gelcoat finish below waterline areas

• 2 independent 400L (113 US gal) diesel tanks with filler necks and overfill protection system (CE)
• Electric fuel gauges on screen at the chart table
• Diesel shut-off valves
• 2 Freshwater tanks of 400 L (105 US gal) each
• Electric water gauges on screen at chart table
• 2 Water pumps with pressure tank and safety interconnection system
• 2 electric water heaters 
• 2 electric bilge pumps interior passageways and engine compartments
• Automatic activation of the 4 bilge pumps with visual alarm at the chart table
• 4 external manual bilge pumps
• Shower drains by automatic shower sump pumps
• Independent faucet at the galley sink providing microfiltered drinking water

• AB 11 foot aluminum RIB
• Honda BF 20 electric start outboard

• Viking Rescu You Pro 6 person liferaft
• Jonboy Recovery System
• EPIRB
• Echo Max radar reflector

Moorings Pack & Fender Fendertex® type:

- 8 fenders with black covers

- 8 fender ropes with splices

-2 large ball fenders with ropes 

- 5 mooring lines

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.