Offered By: Nautical Ventures
Engine
YANMAR 3YM20
Total Power
21hp
Engine Hours
-
Class
Cruisers
Length
31ft
Year
2024
Model
Oceanis 30.1
Capacity
-
Boat Details
Description
Available In Store: Fort Lauderdale
The Oceanis 30.1 promises new experiences and thrills while being simple to sail and lively to helm. This robust, small, smart cruiser is trailable and offers countless opportunities for lake and river sailing as well as coastal sailing and high seas exploration.
With a stemhead, hard-chine hull, and well-proportioned sides and coachroof, the Oceanis 30.1 looks unashamedly like a small yacht. The Finot-Conq plan has met the double challenge of power and simple navigation. With her slender bow, optimized weight, and square-top mainsail, she performs well in all points of sail. For beginners or for short-handed sailing, the self-tacking jib and the single winch make her easy to handle. For performance, the Oceanis 30.1 has a large overlapping genoa, a furling code zero and an asymmetric spinnaker. Aft, a step affords access to the sea and can be supplemented by a small lifting platform.
*Please note, stock images are used. Some features depicted may not be included.
Measurements
Dimensions
Nominal Length:31.25ft
Length Overall:31.25ft
Beam:9.83ft
Length at Waterline:28.42ft
Weights
Dry Weight:8,807Lb
Tanks
Fresh Water Tanks:42.27gal
Fuel Tanks:34.34gal
Accommodations
Cabins:2
Heads:1
Propulsion
Engine Make:YANMAR
Engine Model: 3YM20
Engine Year:2023
Total Power:21hp
Engine Type:other
Fuel Type:diesel
Propeller Type:3-blade
Folding Propeller:
Features
Electrical Equipment
Shore Power Inlet:✓
Inverter:✓
Electronics
Depthsounder:✓
Log-Speedometer:✓
Wind Speed and Direction:✓
Repeater(s):✓
TV Set:✓
Navigation Center:✓
Plotter:✓
Autopilot:✓
Radio:✓
Compass:✓
GPS:✓
Cockpit Speakers:✓
VHF:✓
Inside Equipment
Bow Thruster:✓
Electric Bilge Pump:✓
Oven:✓
Manual Bilge Pump:✓
Microwave Oven:✓
Marine Head:✓
Air Conditioning:✓
Electric Head:✓
Heating:✓
Hot Water:✓
Refrigerator:✓
Battery Charger:✓
Outside Equipment
Cockpit Shower:✓
Outboard Engine Brackets:✓
Radar Reflector:✓
Tender:✓
Cockpit Cushions:✓
Cockpit Table:✓
Swimming Ladder:✓
Rigging
Steering Wheel:✓
Sails
Furling Mainsail:✓
Gennaker Cruising Spinnaker:✓
Asymmetric Spinnaker:✓
Furling Genoa:✓
More Details
CONSTRUCTION
Design in accordance with European Directive requirements and according to CE certification
• Monolithic hull design in polyester
• Monolithic contact structural counter mould (Fabrics - resin) bonded to the hull
• Fiberglass and foam sandwich contact deck - coated with "diamond point" type non-slip
• Deck hull link bonded and screwed
• Cast iron keel fixed with bolts and stainless steel backing plates
• Twin rudders hung with stainless steel stock
• White coloured hull - Grey metal hull graphics
• 2 Hull portholes
RIGGING
• Standard mast (Z-Diffusion) 9/10 anodized aluminum installed on the deck, 1 Set of spreader
• Anodised aluminum boom
• Discontinuous stainless steel standing rigging (Forestay- Side shrouds)
• No backstay
• 1 Standard fore stay
• 1 Rigid boom vang with tackle
• 1 Jib furler with drum on deck
• 2 Mainsail sheet padeyes
• 1 Self-tacking jib sheet track with traveller attached to the deck
• Maneuvers brought back to roof (except boom topping lift - foot)
• Complete running rigging:
• 1 Mainsail halyard
• 1 Jib halyard with cleat and mast cleat
• 1 Boom topping lift with cleat on mast
• 1 Mainsail outhaul
• 1 Mainsail sheet (bridle on the roof)
• 2 Jib sheets
• 2 Rapid reefing lines
• 5 Clutches (to port)
WINCHES
• 1 Self tailing winch (H20.1 STA) on the coachroof (Port)
• 1 Aluminum Harken winch handle
• 1 Winch handle box
SAILS (Sailing Technique)
• Classic square topped mainsail (900 mm), semi battened with slides, Natural UV protection, horizontal section
• Self-tacking Jib on a furler Dacron with UV Natural protection, horizontal section
• Lazy Jack and Lazy Bag in Natural colour
MOORING LINES - Mooring
• Self-draining chain locker - Clench bolt - Hatch cover
• Single roller stainless steel bow fitting with offset roller
• 6 Aluminum mooring cleats - Stainless steel chafing plate
COCKPIT
• Self-draining cockpit in polyester
• 1 Starboard locker (Sail locker, Life raft storage)
• 1 Single gas compartment on the port side
• 1 Gas compartment under port helmsman seat
• Natural solid wood slatted cockpit benches
• Stainless steel tiller with telescopic tiller extension
• 1 Steering compass on the roof (Starboard)
• Engine throttle and control panel on starboard
• 2 Deck access for emergency tiller
• 1 Emergency tiller
• PMMA companionway hatch and door with guillotine door and height-adjustable coaming
SAFETY ON DECK
• Stainless steel pulpit 2 sections
• 2 Stainless steel pushpits
• 1 Lifebuoy support bracket
• Welded ring on pushpit for flag
• Double guard lines and stainless steel stanchions
• Emergency ladder on pushpit
SWIM PLATFORM/ AFT TRANSOM (in trim level)
• Tilting transom with full opening (1.80m x 0.35m / 5'11'' x 1'2'')
• Manual control opening
• Natural solid wood sole
Status
In-Stock
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Location
Estimated Monthly Payment
$0.00*/month
Total Loan Amount:
- 2023 Perception Kayaks Rambler 13.5$719Fort Lauderdale, FL 33316Nautical Ventures-Fort Lauderdale
- 2023 Wilderness Systems Recon 120$1,409Fort Lauderdale, FL 33316Nautical Ventures-Fort Lauderdale
- 2025 Solaris Power 48 OPENRequest a PriceFort Lauderdale, FL 33316Nautical Ventures-Fort Lauderdale
- 2025 Axopar 25 Cross TopRequest a PriceFort Lauderdale, FL 33316Nautical Ventures-Fort Lauderdale