Gainesville, VA 20155
$92,510
Gainesville, VA 20155
$92,510
MERCURY MARINE 250XL PXS4 5.44" 1.75
250hp
-
Center Console
21ft
2024
214 CC
-
With its aggressive Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of fishing performance and family convenience. Bow, forward console and aft seating adds comfort for family and friends, and the optional deck filler expands the forward lounge area.
The versatile 214 CC is overbuilt for safety and comfort. It rides on the legendary MAKO Deep V hull, which dominates chop with its aggressive deadrise and throws down spray with its reverse chines, resulting in a smooth, dry and stable ride. All this, and it's backed by the best factory warranty in saltwater boats—the MAKO Assurance.
Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
Hull/deck chemically bonded, fastened 360° w/316 stainless fasteners & injected w/expanding foam
Aft stern seating w/folding center backrest, removable bow cushions/backrests & 360° coaming bolsters
Mercury® SmartCraft® digital gauges & interior courtesy lights
Molded-in swim platform w/retractable stainless-steel ladder
Under-gunnel port & starboard rod racks for 6 rods
Center console w/electronics mounting surface, Ritchie Navigation® Voyager compass, acrylic windscreen, storage & integrated full-width footrest
Leaning post helm seat & removable forward-console seat w/72-qt. (79.49 L) cooler
210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
Port & starboard bow seating w/108-qt. (102.21 L) insulated storage below & gravity overboard drains
Non-skid surface on walking flats, foredeck, gunnel tops, sole, stern platform & hatch covers
Base Price:$79,355
Savings$5,000
Special Price:$74,355
Included Options$14,410
Prep$495
Freight$3,250
Your Price:$92,510
Nominal Length:21.42ft
Length Overall:21.42ft
Max Draft:1.17ft
Beam:8.5ft
Dry Weight:3,735Lb
Deadrise At Transom:18deg
Fuel Tanks:91gal
Engine Make:MERCURY MARINE
Engine Model:250XL PXS4 5.44" 1.75
Total Power:250hp
Engine Type:outboard
Length:21' 5"
Beam: 8' 6"
Bottom Width: 6' 7.5"
Max. Recommended HP: 250 HP
Fuel Capacity: 91 gal.
Max. Person Capacity: 10 persons
Max. Person Weight: 1700 lbs.
Max. Person, Motor & Gear Weight: 2550 lbs.
Interior Depth: 27"
Transom Height At Center Line: 25"
Deadrise: 18 degrees
Draft: 14"
Average Dry Weight: 3735 lbs.
Average Hull Weight: 3100 lbs.
Average Package Weight: 4535 lbs.
Package Height: 9' 3"
Package Height w/T-top or Hardtop: 11' 2"
Storage Length: 30' 8"
Certification & Safety
Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
NMMA® certified
Factory leak tested for hull, plumbing & fitting integrity
Horn
Flush-mounted Ritchie Navigation® Voyager compass
Console
Stainless steel steering wheel w/knob
Tilt hydraulic steering
Binnacle-mounted motor control(s)
Mercury® SmartCraft® digital gauges
Heavy-duty electrical switching system w/battery selector switch(es)
Switch panel w/manual reset circuit breakers & illuminated switches
Easy access to helm electronics, instruments & switches
FUSION stereo w/4 speakers
Removable forward-console seat w/70-qt. (66.24 L) insulated, drained cooler
Integrated full-width footrest
Acrylic windscreen
Marine-grade tinned wiring w/submersible connectors
Lockable, sealed glovebox
Extra-large electronics mounting surface
2 console drink holders
12V DC outlet
Leaning Post
Powdercoated aluminum leaning post
Helm seat w/flip-up cushion
Storage below seat
Space below leaning post for optional cooler
Rod holders
Top
Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights
.25" (6.35 mm) aluminum backing-plate reinforcement for T-top
Head
Head enclosure/storage space w/stainless steel latch
Wiring access hatch & battery access
Main distribution panel inside head
Courtesy light
Interior
Anchor locker
Foredeck dodger mounting boss
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage
Forward cushions w/removable backrests
210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
Low-profile powdercoated aluminum bow rails
2 gunnel-mounted rod holders
Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long
Aft stern seating w/folding center backrest
Molded non-skid surfaces throughout
Raw water outlet
Bilge access hatch
360° coaming bolsters
Five 6" (15.24 cm) polished marine-grade stainless steel cleats
2 stainless steel bow chocks
Performance
Legendary dry-riding MAKO® hull
Aggressive deep V hull design
Performance lifting strakes
Recessed electric trim tabs
Factory-matched stainless steel propeller
Construction & Exterior
Color: MAKO® Bone White gelcoat
100% composite construction
Coosa® Bluewater 100% composite transom core
Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
Closed-cell foam-injected stringer grid for USCG-approved flotation
Heavy-duty rub rail w/stainless steel insert
Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
Stipple texture to B-side of all fiberglass lids
Closed-molded hatch covers w/finished undersides & integrated gaskets
Aluminum backing plates for cleats & chocks
Swim platform w/3-step stainless steel ladder
Electrical, Mechanical & Plumbing System
High-speed raw water intake
USCG-compliant navigation lights
Interior courtesy lights
2 cockpit courtesy lights & 1 head light
Dual battery rigging
TRACKER® Lithium WRM100HP/31 cranking battery
Heavy-duty electrical switching system
Marelon® corrosion-free seacocks on all below-water thru-hull fittings
Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment
Optional Trailer
OPTIONAL tandem-axle EZ Loader® aluminum trailer available
NMMA® certified
DOT approved
Stainless steel hardware
Galvanized steel components
Tandem-axle brakes
14" (35.56 cm) radial tires w/galvanized V5 wheels
Oil bath hubs
Leaf spring suspension
Heavy-duty winch w/nylon strap & safety strap
LED lighting
PVC loading guides
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.