Engine
Yamaha 300
Total Power
300hp
Engine Hours
-
Class
Center Console
Length
26ft
Year
2024
Model
S 248 Sport
Capacity
-
- We’ll compare over 15 lenders to get you the best rate & terms
- Customized financing to meet your needs
- Over 25 years of marine lending experience
Boat Details
Description
With abundant storage throughout, in-floor fish boxes and a spacious aft cockpit, your pros list for buying the Pursuit S 248 just got a lot longer.
Step aboard the S 248 and have your expectations shattered with feature-packed amenities and luxurious fit and finish.
With a single Yamaha® engine, this 25' 8" entry-level Pursuit is the definition of class-leading. Designed to cater to anglers, the in-floor fishboxes, ample storage bays and spacious aft cockpit are sure to impress. The generous over-sized fiberglass hardtop with full windshield over the center console will protect from the weather when you are running and the sun when you are anchored. Even details like our patented folding aft seat and easy-pull slide out for your cooler demonstrate that nothing was left to chance.
LOA 25' 8" (7.82 m)
Beam 8' 6" (2.59 m)
Hull Draft Motors Up 1'10" (0.56 m)
Hull Draft Motors Down 3'0" (0.91 m)
*Clearance w/Hardtop from Waterline 8' 10" (2.69 m)
Approx. Dry Weight - Single F300 Engine 6,050 lbs (2,744 kg)
**Fuel Capacity 120 U.S. gallons (454 L)
Fresh water Capacity (opt.) 20 U.S. gallons (76 L)
Holding Tank Capacity (opt.) 6 U.S. gallons (23 L)
Max. Horsepower 300 hp (224 kw)
Deadrise 21º
STANDARD EQUIPMENT
HULL FEATURES
• Pursuit® Protection Plan:
Raw Satin euret in Cockpit With Kok Connect
- 5 Year Hull and Deck Structural Warranty
Fittings and 25' Hose
- 5 Year Blister Free Warranty
- 2 Year Limited Warranty
Coaming storage Boxes with Hinged Lids
(Port and Starboard) - Fwd of Console
- Pursuit Fresh White Gelcoat
- Hand Laminated Hull with Vinyl Ester Resin and
- Bow Seating, Console (double-wide) -
Engineered Fabrics
Forward-Facing with Folding Armrests
• Infused Fiberglass Structural Grid System
• Bow Seating, Forward (Port & Starboard) with Fiberglass Hatches, Removable Cushions and
with Molded Finish and Integrated Bilge Water
Management System
Insulated Storage Below
• Foam Filled Structural Grid
- Bow Coaming Storage Boxes (Port & Starboard)
with USB Charger (Port) - 3 Ply Resin Infused Composite Transom System
• Integrated Transom Platform Extensions Outboard Forward In-Floor Storage with Fiberglass Hatch
and Stainless Steel Gas Spring
of Engine
- Fire Extinguisher (Under Starboard Gunwale) |
- Boarding Ladder, 3 Step Telescopic, Mounted in Hull Platform
FISHING FEATURES
• Trim Tabs, Lenco Electric with Auto-Retract
• Rod Holders, Stainless Steel (8) - Gunwales (4)|
• Rope Locker, Self-Draining
and Transom (4)
• Anchor Scuff Plate
• Fish Boxes, In-Floor (port & starboard, 11 gallons
• Horn, Electric with Oval Stainless Steel Cover
each) with Foam Insulation and Diaphragm
Discharge Pump with Diverter Valve
• Bow Eye, 1/2" 316L Stainless Steel
• Live Well, Lighted 24 Gallon Recirculating
• Stern Eyes (2), 1/2" 316L Stainless Steel
(Oceana Blue) with Acrylic Lid
• Bronze Thru Hull Fittings Below Water Line egree weel tine Thru Hull Fittings Below
HARDTOP & WINDSHIELO
• Molded Fiberglass Hardtop |
• Stainless Clad Composite Thru Hull Fittings
• Windshield, Full-Height Tempered Glass
Above the 7 Degree Heel Line
with Side Wings
• Bronze Garboard Drain |
• Powder Coated Structural Hardtop Supports
• Dedicated Transducer Location
with Grab Rails
• Overhead Storage Box
DECK FEATURES
• Rod Holders (4)
• Molded One Piece Deck and Cockpit Liner with
• Anchor/Stern Light with Custom Stainless Steel
Non-Skid Pattern Area and Overboard Drains
Post with Burgee Rings, USA Flag and
• Self-Draining Cockpit with Bronze Ball Valve
Ratcheting Mount
• Overhead Lights (2), Tri-Color LED
• Hull and Deck Joint Mechanically Fastened
• Spreader Lights (2), LED - Fore and Aft Facing
• Molded Single-Level Transom Platform/Splash
• Dedicated Locations for Radar, Outriggers,
Well with Storage Compartments with Fiberglass
VHF and FM Antennas
Hatches (Port and Center), and Integrated Rigging
• Rub Rail: High Density PVC with Solid 316L
Stainless Steel Insert
• Molded Fiberglass Aft Tilting Helm with
• Cleats, 316L Stainless Steel - 8" Pop-Up (2) Stern,
Instrumentation Visor, Electronics Mounting
(2) Mid-Ship and (2) Bow
Surface and Integrated Fiberglass Footrest
- Navigation Lights, 2 Mile LED (Port and Starboard) • Steering Wheel, 316L Stainless Steel on
- Flush Mounted Integral Anchor Locker with
Tilt Sport Plus Helm
Fiberglass Lid
- 12V Switch Panel with Illuminated Rocker Switches
- Anchor Roller Chute with 8" Cleat, 14lb Galvanized • Compass
Plow-Style Anchor and Rode (150' of 1/2" 8 Plait
Monsel finery Stes interior
• Molded Recessed Hatches with Flush Hinges,
• Head, SaniPottie with 5 Gallon Holding Tank
Gaskets and 316L Stainless Steel Latches andi
(Removeable)
Overboard Drain Tracks
• Toilet Tissue Holder
• Custom Cockpit Upholstery with Dri-Fast Foam
• Storage Cabinet with Hinged Access Doors
and Mesh Backing
• Integrally Switched 12V Overhead Light
• Under-Gunwale Rod Storage, Port and Starboard
• 12V Distribution Panel and Battery Switch
(fits 9.5' rods in lower holders)
• Fire Extinguisher
- Folding Transom Seat with Patented
Self-Adjusting Backrest - Fiberglass Leaning Post with Tackle Storage Drawer and Integrated 45-Quart Yeti Cooler with Slide-Out Tray
- Helm Seating with Split Fold-Up Bolsters and
Outboard Foliding Armrests
ELECTRICAL SYSTEMS
- UL" Rated Fully Tinned, Color Coded Copper Wire
- Custom In-House Built, Heat Sealed, Mechanically
- Crimped, Color Coded Battery Cables
- Custom In-House Built, One Piece Electrical Harness with Waterproof Connectors and Chafe Protection
- Powder Coated, Aluminum, Screen Printed (Front & Back) Battery Switch and Breaker Panel
- Two Battery System: Engine (1) and House (1)
- Grounding Bus Bar|
- Electronics Fuse Block |
MECHANICAL SPACE
- Stainless Steel Anchor|
- Molded Interior with Integrated Bilge Sump Area and White Gel Coat
- Molded Removable Access Hatch with Gasket
- Bilge Pumps: 1100 GPH (2) Low Profile with Automatic Float Switches and Stainless Steel Clad
Composite Thru Hull Fittings - Live Well Pump - 1100 GPH Tournament Series with Seacock and Thru Hull Fitting
- Raw Water Pump, Pressure Sensing with In-Line Filter
FUEL SYSTEM
- EPA Compliant Lined 120 Gallon Rotomolded Fuel Tank with Engine Pickup, Shutoff Valve and Digital Level Indicator.
- Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
- Yamaha® Water Separating Fuel Filter with Primer Bulb
Measurements
Dimensions
Nominal Length:25.67ft
Length Overall:25.67ft
Beam:8.5ft
Miscellaneous
Deadrise At Transom:21deg
Tanks
Fresh Water Tanks:20gal
Fuel Tanks:120gal
Holding Tanks:6gal
Accommodations
Heads:1
Propulsion
Engine Make:Yamaha
Engine Model:300
Engine Year:2024
Total Power:300hp
Engine Type:outboard
Fuel Type:gasoline
Propeller Type:3-blade
Propeller Material:stainless-steel
Features
Electrical Equipment
Shore Power Inlet:✓
Electronics
Depthsounder:✓
Log-Speedometer:✓
Navigation Center:✓
Radio:✓
GPS:✓
Cockpit Speakers:✓
VHF:✓
Inside Equipment
Electric Bilge Pump:✓
Marine Head:✓
Battery Charger:✓
Outside Equipment
Cockpit Cushions:✓
Swimming Ladder:✓
Additional Equipment
Road Trailer:✓
More Details
Hull
- Pursuit® Protection Plan:
5 Year Hull and Deck Structural Warranty
5 Year Blister Free Warranty
2 Year Limited Warranty - Pursuit Fresh White Gelcoat
- Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
- Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
- Foam Filled Structural Grid
- 3 Ply Resin Infused Composite Transom System
- Integrated Transom Platform Extensions Outboard of Engine
- Boarding Ladder, 3 Step Telescopic, Mounted in Hull Platform
- Trim Tabs, Lenco Electric with Auto-Retract
- Rope Locker, Self-Draining
- Anchor Scuff Plate
- Horn, Electric with Oval Stainless Steel Cover
- Bow Eye, 1/2" 316L Stainless Steel
- Stern Eyes (2), 1/2" 316L Stainless Steel
- Bronze Thru Hull Fittings Below Water Line
- Chrome over Bronze Thru Hull Fittings Below 7 Degree Heel Line
- Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
- Bronze Garboard Drain
- Dedicated Transducer Location
Deck
- Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area and Overboard Drains
- Self-Draining Cockpit with Bronze Ball Valve at Hull Side
- Hull and Deck Joint Mechanically Fastened
- Molded Single-Level Transom Platform/Splash Well with Storage Compartments with Fiberglass Hatches (Port and Center), and Integrated Rigging
- Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
- Cleats, 316L Stainless Steel - 8” Pop-Up (2) Stern, (2) Mid-Ship and (2) Bow
- Navigation Lights, 2 Mile LED (Port and Starboard)
- Flush Mounted Integral Anchor Locker with Fiberglass Lid
- Anchor Roller Chute with 8" Cleat, 14lb Galvanized Plow-Style Anchor and Rode (150' of 1/2" 8 Plait including 10' of 1/4" G4 Chain)
- Molded Transom Walkthrough and Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
- Bow Grab Rails, 316L Stainless Steel (Port & Starboard)
- Transom Grab Rail, 316L Stainless Steel (Starboard)
Cockpit
- Molded Recessed Hatches with Flush Hinges, Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
- Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
- Under-Gunwale Rod Storage, Port and Starboard (fits 9.5' rods in lower holders)
- Folding Transom Seat with Patented Self-Adjusting Backrest
- Fiberglass Leaning Post with Tackle Storage Drawer and Integrated 45-Quart Yeti Cooler with Slide-Out Tray
- Helm Seating with Split Fold-Up Bolsters and Outboard Foliding Armrests
- 316 L Stainless Steel Cockpit Drink Holders
- Raw Water Outlet in Cockpit with Quick Connect Fittings and 25' Hose
- LED Cockpit Courtesy Lights
- Coaming Storage Boxes with Hinged Lids (Port and Starboard) - Fwd of Console
- Bow Seating, Console (double-wide) - Forward-Facing with Folding Armrests
- Bow Seating, Forward (Port & Starboard) with Fiberglass Hatches, Removable Cushions and Insulated Storage Below
- Bow Coaming Storage Boxes (Port & Starboard) with USB Charger (Port)
- Forward In-Floor Storage with Fiberglass Hatch and Stainless Steel Gas Spring
- Fire Extinguisher (Under Starboard Gunwale)
Fishing Features
- Rod Holders, Stainless Steel (8) - Gunwales (4) and Transom (4)
- Fish Boxes, In-Floor (port & starboard, 11 gallons each) with Foam Insulation and Diaphragm Discharge Pump with Diverter Valve
- Live Well, Lighted 24 Gallon Recirculating
Hardtop
- Molded Fiberglass Hardtop
- Windshield, Full-Height Tempered Glass with Side Wings
- Powder Coated Structural Hardtop Supports with Grab Rails
- Overhead Storage Box
- Rod Holders (4)
- Anchor/Stern Light with Custom Stainless Steel Post with Burgee Rings, USA Flag and Ratcheting Mount
- Overhead Lights (2), Tri-Color LED
- Spreader Lights (2), LED - Fore and Aft Facing
- Dedicated Locations for Radar, Outriggers, VHF and FM Antennas
Helm
- Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface and Integrated Fiberglass Footrest
- Steering Wheel, 316L Stainless Steel on Tilt Sport Plus Helm
- 12V Switch Panel with Illuminated Rocker Switches
- Compass
- Trim Tab Control Panel with Indicator
- 12V Outlet and Dual USB Charger
- Drink Holders, 316L Stainless Steel (2) Extra Deep
- Storage Tray with Non-Slip Padded Surface
Console and Head
- Two Piece Fiberglass Door with Gasket and 316 Stainless Steel Locking Latch
- Molded Fiberglass Interior
- Console Entry Steps
- Head, SaniPottie with 5 Gallon Holding Tank (Removeable)
- Toilet Tissue Holder
- Storage Cabinet with Hinged Access Doors
- Integrally Switched 12V Overhead Light
- 12V Distribution Panel and Battery Switch
- Fire Extinguisher
Electrical
- UL® Rated Fully Tinned, Color Coded Copper Wire
- Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
- Custom In-House Built, One Piece Electrical Harness with Waterproof Connectors and Chafe Protection
- Powder Coated, Aluminum, Screen Printed (Front & Back) Battery Switch and Breaker Panel
- Two Battery System: Engine (1) and House (1)
- Bonding System: Thru-Hull Fittings Below Waterline, Zinc Anode and Garboard Drain
- Grounding Bus Bar
- Electronics Fuse Block
Mechanical
- Molded Interior with Integrated Bilge Sump Area and White Gel Coat
- Molded Removable Access Hatch with Gasket
- Bilge Pumps: 1100 GPH (2) Low Profile with Automatic Float Switches and Stainless Steel Clad Composite Thru Hull Fittings
- Live Well Pump - 1100 GPH Tournament Series with Seacock and Thru Hull Fitting
- Raw Water Pump, Pressure Sensing with In-Line Filter
Fuel
- EPA Compliant Lined 120 Gallon Rotomolded Fuel Tank with Engine Pickup, Shutoff Valve and Digital Level Indicator
- Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
- Yamaha® Water Separating Fuel Filter with Primer Bulb