2024 Vexus AVX 2080

2024 Vexus  AVX2080

ABOUT THIS MODEL

Hot on the heels of the unprecedented demand for the AVX1980, the performance-bred 2080 extends another 4 inches in length, further reinforcing the superior ride of these extraordinary all-welded, pad hulls. The 20’ 2” design also carries an increased horsepower rating for today’s modern 200HP outboards. It’s a fired-up platform infused with a new generation of tournament-level performance. Other distinctive traits include an incredibly quick hole shot and the ultra-smooth feel of SeaStar™ Pro steering. Topping off the rig’s responsive handling, thirty-five gallons of fuel capacity center the layout, lending an easy-going confidence to the rough water ride.

Inside the broad 95” beam, stretch-form gunnels surround a pair of massive decks loaded with storage space. A Minn Kota Ultrex commands the bow while our exclusive, glass-infused recessed trolling motor station includes cup and tool holders as well as room for up to 9" flush-mounted electronics on the bow panel. The center rod box carries room for sticks up to 8 ½’ in length while the port side easily holds 7’10” rods. The starboard compartment features room for more gear and there’s an insulated cooler just forward of the console. The locking deck storages also include raised lips, a rubber trim seal, and stainless-steel compression locks for exceptional wet weather protection.

Features may include:

WHY WE'RE DIFFERENT

• Stretch-Formed Gunnels

• Dual Rod Box setup at Bow

• Oversized Gelcoat/Fiberglass Rear Storage

• Insulated Fiberglass Cooler with Seal and Drain

• All-Welded High-Performance Pad Hull

• Custom Upholstery with Optional Adjustable Driver's Seat

• Loaded with Standard Features

• Tournament Grade Fiberglass Livewell

• Custom Built Vexus® Trailer

• Stainless Pull-Up Tie Cleats

• Oversized Pedestal Bases

• Compression Lid Locks

• Raised Lip and Oversized Seal for Lid Openings

• Vector Force™ Transom

• Hard Case™ Paint

• Wood-Free Design

• Solid State Wiring and Lit Tip Switches

PERFORMANCE AND ENGINEERING

• Available with Power of Choice Professionally Rigged Outboards

• All-Welded AVX High-Performance Hull (.125” bottom thickness)

• Vector Force™ Solid Transom

• Dense Base™ Superstructure Design

• Stainless Steel Prop

• Crank Battery includes Battery Tray and Tie-Down

• SeaStar™ Pro Smooth Hydraulic Steering

• Flush-Mounted Remote Throttle Control

• Tournament Grade Fiberglass Aerated Livewell with Anti-Splash Ring, Divider and Pump-Out

• Bow Trim and Navigation Light Switches

• Speed, Tach, Fuel, Trim, and Water Pressure Gauges

• Balanced Weight Distribution & Design

• Trac-Tight™ Handling

• 35-Gallon Fuel Tank

ADVANCED ELECTRONICS

• Wide Variety of Custom Factory-Rigged Electronics

• 6 Gauge Trolling Motor Wiring

• Minn Kota Ultrex 80/DSC/MR 45" Trolling Motor

• Dual Pro 6x3 On-board Battery Charger

• USB & 12V Power Outlets

• Bilge Pump

• Integrated LED Bow Lights with Removable Stern Navigation Light

• Master Switch and Breakers

• Lit-Tip Toggle Switches with Convenient Resettable Breakers

• LED Light Under Driver Console

• Integrated Horn Assembly

Boat As Shown

• Victor Package;  Humminbird Solix 10 CHIRP MSI+ (Con.); Humminbird Helix 10 CHIRP MDI+ (Bow/Brkt. Mnt.); MinnKota Ultrex Quest DSC MR 45”