Engine
Mercury
Total Power
400hp
Engine Hours
-
Class
Bowrider
Length
28ft
Year
2025
Model
Launch 28 GT
Capacity
-
Boat Details
Description
2025 Chris-Craft Launch 28GT
Introducing the Chris-Craft Launch 28 GT – a fusion of classic elegance and modern performance. Crafted with meticulous attention to detail, this boat combines timeless design with cutting-edge technology for an unparalleled on-water experience.
Key Features:
- Mercury 400 Verado w/ Mercury Active Trim
- Synthetic Teak Covering Boards & Accents
- Bow Thruster
- 9" Garmin Display
- Cockpit Galley w/ Sink & Second Refridgerator
- Motor Cover and Mooring Cover
- Fender Clips
- Woven Seagrass Flooring
- Premium Audio System Upgrade
- Seakeeper Ride
- Removable Teak Table
- Tecma Head System
- Underwater Lights
- Windlass
**Call now for more information or to schedule your private showing**
Measurements
Dimensions
Nominal Length:28ft
Length Overall:28.75ft
Length on Deck:28.75ft
Max Draft:3.08ft
Freeboard:2.08ft
Beam:8.5ft
Length at Waterline:21.83ft
Weights
Dry Weight:7,800Lb
Miscellaneous
Deadrise At Transom:22deg
Tanks
Fresh Water Tanks:20gal
Fuel Tanks:85gal
Accommodations
Heads:1
Propulsion
Engine Make:Mercury
Engine Model:null
Total Power:400hp
Fuel Type:gasoline
More Details
Manufacturer Provided Description
A wide captain’s chair puts you in control behind gleaming gauges and a rich, mahogany steering wheel. The luxurious wave-pattern stitching is complemented by a thick stainless steel bar. And a thigh bolster brings added height and visibility.
Standard Features
-
Teak Maintenance Kit
-
Teak Caulk Color – black
-
3 Yr - Chris-Craft protection plan
-
5 Yr - transferable hull/structural warranty
-
Bow Scuff Plate - SS
-
Certifications and Standards - NMMA, ABYC, USCG
-
Deck Fill Plates - SS
-
Deck - diamond pattern non-skid, fiberglass
-
Flag/Pennant - embroidered Chris-Craft and US Flag kit w/SS magnetic pole and base
-
Color Selections - base gel, Ivory Cream
-
Color Selections - boot stripe - multiple color selections
-
Gunnel Trim Rubrail - molded PVC w/SS insert
-
Hardware - bow and stern eyes, SS
-
Hardware - bow light cover, SS
-
Hardware - chrome plated SS fasteners
-
Hardware - cleats, SS mooring
-
Hardware - high end fit n finish w/316L SS and Chris-Craft logo
-
Hardware - thru-hull fittings, SS
-
Hatches - vacuum infused w/ SS shocks
-
Hull - Chris Craft trademark Tumblehome design
-
Hull - deep V bottom w/flared bow
-
Hull - deck joint - mechanically, chemically bonded
-
Lighting - navigation lights, SS and international compliance
-
Logo - SS, Chris-Craft branded
-
Swim Ladder - 3 step, SS hidden
-
Swim Platform – integral
-
Swim Platform Grabhandle - SS
-
Beverage Holders - Stainless Steel
-
Bolsters - padded gunwhale mounted
-
Drains – SS
-
Fuel System - EPA compliant
-
Grabrails - SS
-
Helm - compass, dash mounted
-
Helm - dash, gauge and switch panels w/silver perforated panels
-
Helm - dash light dimmer
-
Helm - ignition safety switch(es)
-
Helm - model designator, SS
-
Helm - steering wheel, mahogany
-
Helm - steering, tilt w/power assist
-
Helm - stereo remote, MP3/USB inputs w/Fusion Bluetooth enabled
-
Ladder - Stainless Steel boarding
-
Lighting - LED courtesy
-
Outlets/Input - 12v accessory outlet(s)
-
Outlets/Input - USB auxiliary input
-
Speakers - JL Audio Sound System
-
Stereo System - Fusion, AM/FM/Bluetooth/USB
-
Stereo System - Premium upgrade with amp and subwoofer
-
Stowage - aft deck compartments
-
Upholstery Construction - high density foam with antimicrobials and open cell mesh for drying
-
Vinyl - heavy duty, stain/UV resistant
-
Vinyl - multiple design/color selections
-
Windscreen - curved tempered glass
-
Windscreen - Stainless Steel Frame
-
Battery Charger
-
Battery Switch w/breakers
-
Battery Tray(s)
-
Bilge Pump - w/autofloat System
-
Electric Wiring - color coded and numbered w/Duetch connectors
-
Electrical Bonding System
-
Mercury V8 6.2L (300 HP) B3 DTS
-
Teak - bow accents w/SS inserts and Chris-Craft SS Logo inlay
-
Teak - cockpit steps
-
Teak - beverage holder accents
-
Teak - engine walk-over
-
Teak - grab rails (Aft)
-
Teak - helm footpad / footrests
-
Air Intakes - SS
-
Anchor - bow locker - w/teak and Chris-Craft logo inlay
-
Hull - stringer system and liner, 1 piece fiberglass foam filled for floatation and noise reduction
-
Ski Pylon - removable (*pop-up)
-
Swim Platform - integral w/ 3-step ladder
-
Trim Tabs - Lenco
-
Ventilation Grates/Stainless Steel
-
Door - wind, hinged, folds to deck in bow area
-
Galley - refrigerator
-
Helm - depth finder - LCD
-
Helm - digital gauge package, Chris-Craft branded
-
Helm - engine controls, Electronic Control - EVC/DTS/DEC
-
Helm - Engine control, chrome, side mounted
-
Helm - horn, electric trumpet(s)
-
Helm - trim tab controls
-
Seating - aft cockpit, port and starboard rear facing sun loungers
-
Seating - aft U-shaped Seating - bucket seats w/integrated SS handrails and flip-up bolsters
-
Seating - forward, circular w/forward facing port and starboard lounges
-
Seating - portside passenger, chair w/flip-up bolster, swivel and SS integrated grab handles
-
Seating - sunpad, large aft w/ transom walk-over (*includes filler pad)
-
Shower - transom
-
Stowage - aft cockpit, underseat
-
Stowage - bimini, dedicated under engine hatch
-
Stowage - bow, port and starboard recessed
-
Stowage - coaming w/beverage holders
-
Stowage - fender, hidden
-
Stowage - infloor ski/rod
-
Stowage - infloor w/built-in cooler
-
Stowage - port and starboard underseat
-
Windscreen - tempered glass, center walk-thru
-
Toilet - porti-potti
-
Bilge System - electric w/blowers
-
Electric Wiring - tinned copper
-
Engine Compartment Stowage
-
Engine Hatch - emergency lift w/jumper posts
-
Engine Hatch - w/SS hinges, electric rams
-
Engine Hatch Insulation - acoustical barrier, Silver Mylar
-
Fire Extinguish System - automatic w/manual override
-
Fuel System - aluminum tanks w/anti-siphon valves and electric sending units