2025 Mako 214 CC

• Length:21' 5"

• Beam: 8' 6"

• Bottom Width: 6' 7.5"

• Max. Recommended HP: 250 HP

• Fuel Capacity: 91 gal.

• Max. Person Capacity: 10 persons

• Max. Person Weight: 1700 lbs.

• Max. Person, Motor & Gear Weight: 2550 lbs.

• Interior Depth: 27"

• Transom Height At Center Line: 25"

• Deadrise: 18 degrees

• Draft: 14"

• Average Dry Weight: 3735 lbs.

• Average Hull Weight: 3100 lbs.

• Average Package Weight: 4535 lbs.

• Package Height: 9' 3"

• Package Height w/T-top or Hardtop: 11' 2"

• Storage Length: 30' 8"

Certification & Safety

• Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats

• NMMA® certified

• Factory leak tested for hull, plumbing & fitting integrity

• Swim platform w/3-step stainless steel ladder

• Horn

• Flush-mounted Ritchie Navigation® Voyager compass

Console

• Acrylic windscreen

• Stainless steel steering wheel w/knob

• Tilt hydraulic steering

• Binnacle-mounted motor control(s)

• Mercury® SmartCraft® digital gauges

• Heavy-duty electrical switching system w/battery selector switch(es)

• Switch panel w/manual reset circuit breakers & illuminated switches

• Easy access to helm electronics, instruments & switches

• FUSION stereo w/4 speakers

• Removable forward-console seat w/70-qt. (66.24 L) insulated, drained cooler

• Integrated full-width footrest

• Marine-grade tinned wiring w/submersible connectors

• Lockable, sealed glovebox

• Extra-large electronics mounting surface

• 2 console drink holders

• 12V DC outlet

Leaning Post

• Powdercoated aluminum leaning post

• Helm seat w/flip-up cushion

• Storage below seat

• Space below leaning post for optional cooler

• Rod holders

Top

• Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights

• .25" (6.35 mm) aluminum backing-plate reinforcement for T-top

Head

• Head enclosure/storage space w/stainless steel latch

• Wiring access hatch & battery access

• Main distribution panel inside head

• Courtesy light

Interior

• Anchor locker

• Foredeck dodger mounting boss

• 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats

• Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage

• Forward cushions w/removable backrests

• 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket

• Low-profile powdercoated aluminum bow rails

• 2 gunnel-mounted rod holders

• Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long

• Aft stern seating w/folding center backrest

• Molded non-skid surfaces throughout

• Raw water outlet

• Bilge access hatch

• 360° coaming bolsters

• Five 6" (15.24 cm) polished marine-grade stainless steel cleats

• 2 stainless steel bow chocks

Exterior

• Legendary dry-riding MAKO® hull

• Aggressive deep V hull design

• Performance lifting strakes

• Recessed electric trim tabs

• Factory-matched stainless steel propeller

Construction & Exterior

• Color: MAKO® Bone White gelcoat

• 100% composite construction

• Coosa® Bluewater 100% composite transom core

• Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core

• Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners

• 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish

• Closed-cell foam-injected stringer grid for USCG-approved flotation

• Heavy-duty rub rail w/stainless steel insert

• Premium marine-grade stainless steel hardware & fasteners for corrosion resistance

• Closed-molded hatch covers w/finished undersides & integrated gaskets

• Aluminum backing plates for cleats & chocks

Electrical, Mechanical & Plumbing System

• High-speed raw water intake

• USCG-compliant navigation lights

• Interior courtesy lights

• 2 cockpit courtesy lights & 1 head light

• Dual battery rigging

• TRACKER® Lithium WRM100HP/31 cranking battery

• Heavy-duty electrical switching system

• Marelon® corrosion-free seacocks on all below-water thru-hull fittings

• Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Optional Trailer

• OPTIONAL tandem-axle EZ Loader® aluminum trailer available

• NMMA® certified

• DOT approved

• Stainless steel hardware

• Galvanized steel components

• Tandem-axle brakes

• 14" (35.56 cm) galvanized V5 wheels w/radial tires

• Oil bath hubs

• Leaf spring suspension

• Heavy-duty winch w/nylon strap & safety strap

• LED lighting

• PVC loading guides

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.