Engine
-
Total Power
-
Engine Hours
-
Class
Trawler
Length
72ft
Year
2025
Model
71
Capacity
-
Boat Details
Description
The Nordhavn 71 follows in the wake of the Nordhavn 80, providing her owners an elegant, modern, state-of-the-art passagemaking yacht. The N71 is a brand new hull, created especially for those who find themselves in the upper end of the mid-size range, who desire the aesthetic of one of Nordhavn’s larger yachts, but want the ability to manage without crew.
Indeed, with the first three hulls committed by former owners of Nordhavn 68 or Nordhavn 60 models, the N71 seems to be filling a void. Nordhavn co-owner and Chief of Design Jeff Leishman said the N71 is a modern response to the third generation Nordhavns that were built in the early 2000s. Styling, technology and creature comforts have all evolved since then. “It was time to provide that size category in our product line with a new alternative,” he said.
The Nordhavn 71 is available in two layouts: a three-stateroom layout with skylounge, or a layout that incorporates a fourth stateroom in place of the skylounge. While decidedly smaller than the 80, the N71 mimics her twin model configuration, sleek lines and advanced level of engineering. She was designed with Nordhavn’s in-house Computational Fluid Dynamics program. As is the case with all long-range Nordhavns, she will have ocean-crossing capability and will be built to the strictest CE Certification standard for offshore use.
About Nordhavn
Measurements
Dimensions
Nominal Length:71.83ft
Max Draft:6.67ft
Beam:22.42ft
Length at Waterline:68.33ft
Weights
Dry Weight:227,800Lb
Tanks
Fresh Water Tanks:600gal
Fuel Tanks:4830gal
Holding Tanks:150gal
More Details
Galley
-
Refrigerator/Freezer with ice maker: GE Monogram 30″ integrated model # ZIC30GNHII x 2 with wood overlay panels
-
Floors: Engineered wood w/ micro bevel
-
Counter top: Light weight stone with 1/8″r square edges, from available supply in Taiwan
-
Cabinet paneling: All cherry
-
Interior locker finish to be white Formica finish
-
All drawers in the galley to have white Formica finish on the inside
-
Microwave: Sharp model #SMD 2470ASY (drawer type)
-
Oven: Miele 30″ convection oven #H 6180 BP
-
Stove: Miele 30″ 4 burner electric Induction cooktop #KM 6360 240V
-
Vent Hood: Miele 30″ built under hood #DA 1280
-
Trash Compactor: GE Profile 15″ stainless steel trash compactor #GUCG1680LSS
-
Dishwasher: Miele stainless steel dishwasher #G 4228 SCU AM
-
Insinkerator garbage disposal #INS75 3/4 hp
-
Stove back splash to be light weight stone
-
Install pot holder rail system around the stove with holder arms, recessed sockets
-
Pantries w/ slide out shelves
-
All locker doors, drawers & slide out shelves to use soft close hardware
-
Bar stools (3) per design
-
(1) Grohe Soap dispenser
Main Salon
-
Floors: Engineered wood w/ micro bevel
-
Interior wood selection: cherry cabinetry and wall covering as specified
-
Locker interior finish: cherry
-
Cherry valance/air con soffit port and starboard sides of salon
-
Overhead recess with cherry trim and LED stip lighting
-
Cherry coffee tables P&S
-
Loose furniture provided by owner/PAE
-
Wall sconces at forward end P&S
Dining
-
Cherry table large enough to seat x8. Chairs provided by owner/PAE
-
Floors: Engineered wood w/ micro bevel
-
30″ high cabinet along port side with drawers and lockers for storage.
-
Hutch with drawers and shelves for dishes flatware with granite counter top and cabinets above w/ glass panel doors stbd. side
-
Recessed overheard with cherry trim and custom lighting fixture over dining table
Master Cabin
-
Floors: Carpet with Soundown underlayment pad installed during commissioning/PAE
-
Interior wood selection: Cherry cabinetry and wall covering as specified
-
Hanging locker interior finish: “Cedar wood” natural finish x 4
-
TV alcove for flat screen 50″ (127 cm) TV (TV not included)
-
Vanity/desk area on port side
-
Mattress: Standard king / PAE to supply
-
Locker interior finish to be cherry
-
Drawer finish: varnished plywood
-
Hull staving to be varnished cherry
-
Extra insulation under bunk included to minimize sound from cabin/head area below
-
Overhead hatches to have Oceanair privacy/bug screens
-
Wall sconces at head of berth
Pilothouse
-
Floors: Engineered wood w/ micro bevel
-
Interior wood selection: Cherry cabinetry and wall covering as specified
-
Counter tops and instrument panel faces: Formica #939 dark gray
-
Dinette table: Cherry with 50% gloss varnish
-
Settee with chart drawers under
-
Helm seat – Two (2) Stidd 500N-2X2 Low Back “Slimline”. Ultraleather and pedestal powdercoat, color are buyer’s choice
-
Dash locker interior finish to be white formica
-
Book shelves and chart drawers
-
Hand rails: One each on the port and starboard forward doors
-
Compass – Cassens & Plath Beta 4 #210285-black inverted compass mounted on a teak block
-
Pilothouse console backside of monitor dash, underside of overhead dash & vertical mullions to be wrapped with black Ultraleather
-
Drawer finish: varnished plywood
-
Pilothouse console to be fitted with exhaust fans to evacuate heat build up
-
All plywood for bulkheads and cabinetry to be light weight type at pilot house level and above
-
Uline Refrigerator 24″ under chart table fwd port side, left hand hinge model #- U-1224RGLS-00A
-
Fold up-down 37″ TV mount per drawing. Motivtated design model 37FD